MIDI TO AMX-192
In this application, MIDI is converted to AMX 192.
CONNECTOR
OPERATION
Microplex IN
Not used
Microplex OUT
Not Used
DMX IN
Not used
*DMX out
Output AMX 192 (64 or 128 ch)
MIDI / Analog
MIDI Input
Luma-net
Not Used
RS-232
Not Used
JUMPER LOCATIONS
P4 & 5
P7
JP6 & 7
JP8 & 9
JP10
JP11
JP12
JP13
OPEN
OPEN
N/A
1-2
1-2
2-3
2-3
2-3
P6
P8
JP1
DMX OUT CABLE
N/A
N/A
POSITION 2
JP3
DIPSWITCH POSITIONS
C1
C2
C3
C4
ADDRESS 1 - 7
A8
DN
DN
UP
DN
A1-4 SELECTS MIDI CHAN, A5 UP SETS IGNORE NTOFF DN:64
MIDI Channel 1 - 16 can be selected with switch A1-4 (see chart at end).
Velocity of MIDI Note On messages set respective dimmer levels. C0 = dimmer channel 1.
Note Off (or Note On = 0) will turn off channel unless A5 is in the up position.
AMX output is sent as either 64 or 128 channels, depending on the setting of switch A8.
*IMPORTANT - Move AMX output connector jumper from JP4 to JP3.
INTERFACE UNIT
Software Revision 1.05, Version A
MIDI TO AMX-192
NSI CORPORATION
10
