LUMA-NET to DMX-512
In this application, Microplex or DMX is mixed with LUMA-NET and transmitted as DMX 512.
CONNECTOR
OPERATION
Microplex IN
Input Microplex
Microplex OUT
Not Used
DMX IN
Input DMX 512
DMX out
Output new DMX-512
MIDI / Analog
Not used
Luma-net
Luma-net network
RS-232
Not Used
JUMPER LOCATIONS
P4 & 5
P7
JP6 & 7
JP8 & 9
JP10
JP11
JP12
JP13
OPEN
N/A
2-3
N/A
2-3
2-3
1-2
2-3
P6
P8
JP1
DMX OUT CABLE
CLOSE
CLOSE TO TERM
LUMA
POSITION 2
JP4
DIPSWITCH POSITIONS
C1
C2
C3
C4
ADDRESS 1 - 7
A8
DN
DN
DN
UP
STARTING ADDR OF LUMA-NET IN 16 INCREMENT
Allows 128 channels of Luma-net to be merged with DMX 512 in a ‘‘last action takes precedence’’ fashion.
Terminate Luma-net by closing jumper P8 only if last device on line.
Input of IF 501 is always last device at end of source DMX line.
See operator’s manual of Luma-net device for additional information.
DMX output is sent as either 64 or 128 channels, depending on the setting of switch A8.
INTERFACE UNIT
Software Revision 1.05, Version A
LUMA-NET to DMX-512
NSI CORPORATION
14