6000 series IP recorders
-
User
’
s manual
-
version 1.2
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
25
MAC ADDRESS - displays MAC address for Ethernet port
DHCP STATUS - ENABLE means that the device obtains an IP address from a DHCP server,
DISABLE - getting address from DHCP server is turn off
INTERNAL ETHERNET PORT - ENABLE setting means internal PoE port is active.
SUBNET MASK - displays IP network mask for port
GATEWAY - displays geteway for IP network
PREFERED DNS - displays main DNS server address
ALTERNATE DNS - displays second DNS server address
PPPoE STATUS - displays PPPoE information
PORT - displays information about IP ports
HTTP PORT - displays port used for HTTP transmission ( default value 80)
SERVER PORT - displays port used for data transmission ( default value 6036 )
RTSP PORT - display port used for RTSP data streams (default value 554 )
TOTAL BANDWIDTH - displays the total possible bandwidth that the DVR is able to record from
the cameras.
REMAIN BANDWIDTH - displays remain bandwidth for getting video streams form the cameras
TOTAL SEND BANDWIDTH - displays information for total possible bandwidth for streams send
from NVR to network clients
REMAIN SEND BANDWDTH - displays information for remaining bandwidth for sending video
streams form NVR to network clients
NAT STATUS - displays whether the included options to connect using the P2P is active.
2.1.3.6. Disk
Displays information about the hard drives connected to the NVR. You have the following
information:
DISK - displays the name of the hard disk
CAPACITY [GB] - indicates the size of the hard drive
FREE SPACE [GB] - displays information about the currently available free space on the disk
STATUS - informs about the mode in which the HDD is
SOURCE - informs about source of recordings
GROUP - information about disk group
RECORD PERIOD - information about the earliest and the latest recordings on the HDD.
NVR OPERATING
