6000 series IP recorders
-
User
’
s manual
-
version 1.2
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
44
2.4.3. Sensor Alarm
In TYPE column it’s possible to set alarm input type :
NO - normal open type
NC - normal close type
In ENABLE column it’s possible to disable/enable alarm inputs.
In this menu it possible to set reaction for sensor alarm.
RECORD - activates record for specific channels
SNAPSHOT - perform still image snapshot
ALARM-OUT - activation of alarm outputs in the camera or DVR
PRESET - selects preset for PTZ cameras
BUZZER - activates buzzer
POP-UP MESSAGE BOX - displays pop-up message box
E-MAIL - send an email notification of the event
2.4.4. Exception
2.4.4.1. IPC Offline Settings
In this menu it’s possible to set activity after camera disconnection. This reactions are available :
SNAPSHOT - performs still image capture from video
ALARM-OUT - triggers alarm output activation
BUZZER - activates audio buzzer
POP-UP VIDEO - displays pop-up video
E-MAIL - sends e-mail with alarm information
2.4.4.2. Exception Handling Settings
In this menu it’s possible to define settings for actions after system errors.
IP ADDRESS CONFLICT - generates error after detections of IP addresses conflict
DISK IO ERROR - generates error after disk error
DISK FULL - generates an error in case of overflow hard drive
NO DISK - generates an alarm after disk lost
ILLEGAL ACCESS - generates an alarm in case of illegal attempts to access
NETWORK DISCONNECTION - generates an alarm after network disconnection
There are the following reactions of alarm after the incident:
ALARM-OUT - triggers alarm output activation
BUZZER - activates audio buzzer
POP-UP MESSAGE BOX - displays pop-up message box
E-MAIL - send an email notification of the event
NVR OPERATING
