LogBox-DA Datalogger
NOVUS AUTOMATION
6/7
Fig. 15
- General Information window
Acquisitions Table Window
Here the data is presented in a table format, showing the date/time
and the records values.
Fig. 16
– Screenshot showing the acquisitions table
MONITORING ACQUISITIONS
To visualize current measurements in a graph format, use the
Monitor On-Line
command by clicking on the button:
While pointing the IR-LINK3 interface to the logger.
Fig. 17
– Online monitoring graph
OBSERVATIONS
The logger is an electronic device and some basic care is required:
•
When opening the device for battery replacement or connecting
sensors avoid touching the circuit for not causing damages
resulting from static electricity.
•
When the device is opened, avoid liquid and/or dust contact.
•
Use a screwdriver to open the case cover. Pay attention to
batteries polarity:
The positive terminal should be placed
directed towards the center of the device.
•
Worn batteries should not be recharged, dismantled or
incinerated. After use, batteries must be disposed according to
local legal rules or returned to Novus.
•
After placing batteries back to the logger, make sure the
cover is firmly attached to the socket.
MOST FREQUENTLY PROBLEMS
The LED is not flashing.
The LED flashing light is intentionally weak, and it can be difficult to
see it in illuminated environments. Make sure it is not flashing at all.
Make sure the battery is installed correctly.
Make sure the battery is not discharged.
Communication with the logger fails
Make sure the COMM port is selected correctly and there is no other
program using the same port during communication attempts.
Make sure there is no physical obstacle blocking the infrared signal.
Make sure the cable is well connected to the PC port.
Make sure the port selected does not present any problem.
ADDITIONAL INFORMATION
If you have any doubt concerning this or other NOVUS products, e-
mail us at
or visit our home page:
www.novus.com.br
www.novusautomation.com
