LogBox-DA Datalogger
NOVUS AUTOMATION
4/7
Note: Make sure that the compress fitting is perfectly tightening the
cables, thus assuring proper IP65 protection (totally dust-tight and
protected against water jets).
Fig. 8
– IP65 connections internal view
CONNECTIONS IN THE IP67 MODEL
In theIP67 version, a M8 connector is provided for signal input, as in
Fig. 9
. When required, a second M8 connector can be installed to
output the signal for commanding the external power supply. The
cables are supplied with the logger.
Note: The case cover should not be opened unless battery
replacement is required. If this is the case, the cover must be
properly tightened back in its place such as to assure the IP67 / 68
protection.
Fig. 9
– IP67 external connectors
Wire connections
Channels cable (right)
Connection
Blue
Channel 1 – (3 IN1) – positive (+)
Black
Channel 1 – (4 GND) – negative (-)
White
Channel 2 – (1 IN2) – positive (+)
Brown
Channel 2 – (2 GND) – negative (-)
Switch cable (left)
Connection
Blue
Transducer (7 +VTRANS)
Black
External Battery (5 -BAT)
White
External Battery (6 +BAT)
Brown
Not connected
Fig. 10
– Voltage pulse and dry contact channel 1 input
Fig. 11
– NPN and PNP open collector input for channel 1
Fig. 12
– Current and voltage inputs for channel 2
