NOVUS AUTOMATION
www.fieldlogger.net
49/104
After finishing the entire configuration, you can send it to the equipment. Just click on the "Send" button. If the
configuration was previously read from the device and the interface was not disconnected, the same interface used for
reading will be used for writing. In any other case, we must choose which interface to use for sending the configuration.
At the end of the transmission, a message shall appear indicating the success (or not) of the operation. After the
transmission, if desired, you can save the configuration to a file to be retrieved in the future.
If, instead of sending the configuration to the equipment, you just want to save it to a file, you must choose the file name
and click on the “Save” button.
