Operating manual
LTSA LTMA
Product description
INTENDED USE
The Applicator LTSA is an additional device for XLP 504 label printers from NOVEXX Solutions.
The Applicator LTMA is an additional device for XLP 514 label printers of the same menufacturer.
The applicator takes over self-adhesive labels from the printer’s dispensing unit and applies them to
moving or stationary products.
The applicator is bolted to the printer by means of a rigid connecting plate. It requires no separate
power supply; it is connected to the printer by means of a plug connector and is supplied with power
via the printer.
The controller of the applicator is integrated into the firmware of the printer. The application process is
triggered by one of the following 4 possibilities:
• Press a button on the printer operation panel
• Easy Plug immediate command (#!D) at the data interface
• Press an
optional
foot switch (connected to the printer)
• External start signal received via the
optional
signal interface (e.g. from a product sensor)
Working position
: The LTSA/LTMA is an attachment for a tabletop printer. The application direction is
therefore vertically from top to bottom.
Any other type of or more extensive application will be considered non-intended use. This includes in
particular installation of the XLP 504/XLP 514 with LTSA/LTMA in any other than the working position
described above.
NOVEXX Solutions assumes no liability for damage resulting from any form of non-intended use of the
printer.
Fig. 2: Semi-automatic operation of the LTSA/LTMA on a tabletop. The products are positioned by hand, the application
process is triggered via a switch (e.g. foot switch).
Edition 02 - 7/2021
7
Product description
Intended use
