Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - 07-20-2009, Руководство по установке

Страница: 99 / 134

Upgrading to ZENworks 7.2 Linux Management with IR1/IR1a 99
no
vd
ocx
(e
n)
13
Ma
y 20
09
4 Click the Details tab.
5 In the Scriptable Actions section at the bottom of the Details page, click New to display the
New Scriptable Action dialog box.
6 In the Scriptable action drop-down list, select Pre-Installation .
7
In the Script to run drop-down list, select Define your own script .
8 Paste the contents of the
pre-install.sh
script file into the Script content box. You can
access the script file from the
/data
directory located within the directory on which ZENworks
7.2 Linux Management with IR1/IR1a/IR2 is mounted. For example, if ZENworks 7.2 Linux
Management with IR1/IR1a/IR2 is mounted on
/zlm72/install
, the
pre-install.sh
script
file resides in the
/zlm72/install/data
directory.
If the managed device has bundle locks or package locks (
package-locks.xml
), the Pre-
Installation script takes a backup of the bundle locks or package locks and places the backup in
the
/tmp/zmd
directory.
9
Click OK .
10 In the Scriptable Actions section at the bottom of the Details page, click New to display the
New Scriptable Action dialog box.
11 In the Scriptable action drop-down list, select Post-Installation .
12 In the Script to run drop down list, select Define your own script .
13 Paste the contents of the
post-install.sh
script file into the Script content box. You can
access the script file from the
/data
directory located within the directory on which ZENworks
7.2 Linux Management with IR1/IR1a/IR2 is mounted. For example, if ZENworks 7.2 Linux
Management with IR1/IR1a/IR2 is mounted on
/zlm72/install
, the
post-install.sh
script file resides in the
/zlm72/install/data
directory.
NOTE: In the
post-install.sh
script file, the messages indicating the progress of the
upgrade are commented out by default. If you want the messages to be displayed on the
managed device, uncomment the messages.
The Post Installation script performs the following tasks:
Š
Restores the bundle locks and package locks backup from the
/tmp/zmd
directory to the
appropriate directories.
Š
Creates the
/tmp/zmd/upgrade_final.sh
shell script that automatically stops the zmd
service, removes the system catalogs, and restarts the service.
Š Uses the atd server to assign a scheduled task and execute the
upgrade_final.sh
shell
script two minutes after the
post-install.sh
has completed execution.
14 Click OK .
15 Click Apply at the bottom of the Details page.
16 In the RPM Package Bundle Settings section of the Details page, click Deploy to deploy the
new version of the bundle.
17 Continue with “Creating Catalogs for Upgrade Bundles” on page 99 .
Creating Catalogs for Upgrade Bundles
1 Click the Bundles tab.
2 Click New , then click Catalog to open the Create New Catalog Wizard.