Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - 07-20-2009, Руководство по установке

Страница: 113 / 134

Upgrading to ZENworks 7.2 Linux Management with IR2 113
no
vd
ocx
(e
n)
13
Ma
y 20
09
Servers as well as for the local host. An unedited file has a series of zeroes in place of the IP
addresses and subnet masks; you replace the zeroes with the information for your primary and
secondary ZENworks servers.
If you upgrade from ZENworks 7 Linux Management - Dell* Edition, this process is not necessary.
Consult your PostgreSQL documentation for more information.
13.5 Changes to Bundle Schedules in ZENworks
7.2 Linux Management with IR2
Because of the elimination of certain schedule types for bundles in ZENworks 7.2 Linux
Management with IR1, the deployment and installation schedules for bundles that existed in your
ZENworks system prior to upgrading might behave differently.
ZENworks 7.2 Linux Management with IR1 supports the following schedule types for bundles:
Š “ Date Specific ”
Š
“ Event ”
Š “ Relative to Refresh ”
The following schedule types are no longer supported for bundles in ZENworks 7.2 Linux
Management with IR1, although they are still supported for certain policies:
Š
“ Day of the Week Specific ”
Š
“ Monthly ”
In an upgrade from ZENworks 7 Linux Management with IR1 or ZENworks 7 Linux Management -
Dell Edition, any bundles that were configured using the Day of the Week or Monthly schedules are
treated as Relative to Refresh after the upgrade.
If you look at a bundle’s properties in the ZENworks Control Center after the upgrade, an upgraded
bundle that was originally configured using the Day of the Week Specific or Monthly schedule has
the eliminated schedule type listed, but deploys or installs using the Relative to Refresh schedule.
You can manually change the bundle’s displayed schedule type to one of the three valid schedule
types at your convenience.
13.6 Upgrade Options
The following options can be used with the
zlm-upgrade
command:
If you are installing ZENworks Linux Management rather than performing an upgrade from a
previous version, installation options are available for use with the
zlm-install
command. For
more information, see Section A.1, “Installation Options,” on page 117 .
Option Description
-a
Upgrades the ZENworks Agent on a managed device.
-b Creates bundles that can be used to upgrade ZENworks Linux Management devices.
This option must be executed only on the ZENworks Primary Server.