Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - 07-20-2009, Руководство по установке

Страница: 49 / 134

Installing a ZENworks Secondary Server 49
no
vd
ocx
(e
n)
13
Ma
y 20
09
System clock synchronization is required to ensure correct operation of the ZENworks system.
If the two servers are not synchronized, the installation fails.
After synchronizing the clocks, restart eDirectory and all ZENworks Linux Management
services on each server that had its clock’s time changed. To restart the ZENworks Linux
Management services, enter the following command:
/opt/novell/zenworks/bin/zlm-config --restart
7 At the intended Secondary Server, mount the product media of the ZENworks Linux
Management version you want to install by using the
mount device mountpoint
command:
Š
Use the Novell ZENworks 7 Linux Management CD to install ZENworks 7 Linux
Management.
Š Use the Novell ZENworks 7.2 Linux Management Server CD to install ZENworks 7.2
Linux Management.
Š
Use the Novell ZENworks 7.2 Linux Management with Interim Release 1 Server CD to
install ZENworks 7.2 Linux Management with IR1.
Š
Use the Novell ZENworks 7.2 Linux Management with Interim Release 2 Server CD to
install ZENworks 7.2 Linux Management with IR2.
For example, to install ZENworks 7 Linux Management, mount the product media by using
mount /dev/cdrom /zlm7
.
If you are using an ISO image rather than a physical media, copy the ISO to a temporary folder
on the Linux server, then mount the image using the following command:
:
mount -o loop / tempfolderpath / isoimagename .iso mountpoint
Replace tempfolderpath with the path to the temporary folder and replace mountpoint with the
path to the file system location you want to mount the image. The path specified by mountpoint
must already exist.
For example:
mount -o loop /zlm7/ZEN7_LinuxMgmt.iso /zlm7/install
8 Log in as
root
, then start the installation program from the mount point by running the
following command:
./
zlm-install
NOTE: The steps in this procedure perform a standard installation of ZENworks Linux
Management. Depending on your situation, additional options can be used with the
zlm-
install
command. For more information, see Section A.1, “Installation Options,” on
page 117 .
If you do not have the X Window System installed (for example, you installed a Minimal
installation of SUSE Linux Enterprise Server 9), you must install the glib2, XFree86-libs-32
bit, and compat-32bit packages and use the -x option while installing the ZENworks Agent. For
more information, see
“-x” on page 118 .
For more information about installing ZENworks Linux Management on a SUSE Linux
Enterprise Server with a Minimal installation, see
“Operating System” on page 25 .
9 When prompted to install ZENworks, enter
Y
to continue.
10 Review the Software License Agreement, pressing Page Down to scroll down the page, then
enter
Y
to accept the agreement.