Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - 07-20-2009, Руководство по установке

Страница: 87 / 134

Upgrading to ZENworks 7.2 Linux Management 87
no
vd
ocx
(e
n)
13
Ma
y 20
09
4 When prompted to upgrade ZENworks Linux Management, enter
Y
to continue.
5 Review the Software License Agreement, pressing Page Down to scroll down the page, then
enter
Y
to accept the agreement.
The install program stops ZENworks services, subscribes to the upgrade channels, upgrades
RPMs, upgrades zmd, runs upgrade scripts, and then restarts the ZENworks services.
11.1.4 Upgrading Managed Devices by Using Upgrade Bundles
Upgrading managed devices to ZENworks 7.2 Linux Management installs the new ZENworks
Agent.
Make sure the managed device meets the requirements. See Section 2.3, “Managed Device
Requirements,” on page 26 .
Complete the following tasks in the order listed:
1. “Creating a Script for Upgrade Bundles” on page 87
2. “Creating Catalogs for Upgrade Bundles” on page 88
3. “Upgrading Managed Devices Other Than SLES 10 and SLED 10 by Using an Upgrade
Bundle” on page 88
or “Upgrading SLES 10 or SLED 10 Managed Devices by Using an
Upgrade Bundle” on page 89 .
Creating a Script for Upgrade Bundles
1 In the ZENworks Control Center, click the Bundles tab.
2 Click the folder that you created while performing an in-place upgrade on the ZENworks
Primary Server (
Step 10 on page 85 ) to hold the upgrade bundles.
3 Click the underlined name of the desired upgrade bundle to display its details.
4
Click the Details tab.
5 In the Scriptable Actions section at the bottom of the Details page, click New to display the
New Scriptable Action dialog box.
6 In the Scriptable action drop-down list, select Pre-Installation .
7 In the Script to run drop-down list, select Define your own script .
8 Paste the contents of the
pre-install.sh
script file into the Script content box. You can
access the script file from the
/data
directory located within the directory on which ZENworks
7.2 Linux Management is mounted. For example, if ZENworks 7.2 Linux Management is
mounted on
/zlm72/install
, the
pre-install.sh
script file resides in the
/zlm72/
install/data
directory.
If the managed device has bundle locks or package locks (
package-locks.xml
), the Pre-
Installation script takes a backup of the bundle locks or package locks and places the backup in
the
/tmp/zmd
directory.
9 Click OK .
10 In the Scriptable Actions section at the bottom of the Details page, click New to display the
New Scriptable Action dialog box.
11 In the Scriptable action drop-down list, select Post-Installation .
12 In the Script to run drop down list, select Define your own script .