Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - 07-20-2009, Руководство по установке

Страница: 117 / 134

Additional Installation Information
A
117
no
vd
ocx
(e
n)
13
Ma
y 20
09
A
Additional Installation Information
The following sections contain additional information to help you install Novell
®
ZENworks
®
Linux Management:
Š
Section A.1, “Installation Options,” on page 117
Š Section A.2, “Automating Installation of the ZENworks Agent,” on page 118
Š
Section A.3, “Installing ZENworks Linux Management on a SLES 9 Server with a Minimal
Installation,” on page 119
Š
Section A.4, “Installing ZENworks Linux Management on a SLES 10 Server with a Customize
Installation,” on page 119
Š Section A.5, “Installing a ZENworks Server on a Device Configured with DHCP,” on page 121
A.1 Installation Options
When you installed Novell ZENworks Linux Management on a ZENworks Primary Server or on
secondary ZENworks servers as described in
Section 5, “Installing the ZENworks Primary Server,”
on page 41 or Section 6, “Installing a ZENworks Secondary Server,” on page 47 , you performed a
standard installation without using additional installation options.
When you installed ZENworks Agent on managed devices as described in Section 7.2, “Installing
the ZENworks Agent and Registering the Device,” on page 54 , you used the
-a
or
-o
installation
options.
NOTE: If you are performing an upgrade from a previous version of ZENworks Linux
Management, as explained in “Upgrade” on page 71 , you can use upgrade options with the
zlm-
upgrade
command. For more information, see “Upgrade Options” on page 91 .
The following options can be used with the
zlm-install
command:
Table A-1
Options that can be used with the ZLM-install command
Option Description
-p Prompt before adding each package.
-s Run silently using data from a previous configuration. Specify the response file that you
want to use. This is the response file that you recorded user input by using the -r
command. The following command shows the option’s usage:
zlm-install -s config_file
-r Record user input, including passwords, to be used in future silent-configuration
installations. Specify the response file that you want to record the user input to. This is the
response file that you use with the -s command to run a silent configuration. The following
command shows the option’s usage:
zlm-install -r config-file
-a Install only agent portions of ZENworks Linux Management.