Novell IFOLDER 3.7 - SECURITY ADMINISTRATION, Руководство администратора

Страница: 76 / 216

76 OES 2 SP1: Novell iFolder 3.7 Administration Guide
no
vd
ocx
(e
n)
13
Ma
y 20
09
6.5.1 Prerequisites
Novell iManager 2.7
If you have not already done so, install Novell iManager 2.7 on the same or different server as your
iFolder server. For information, see
Novell iManager 2.7 Installation Guide (http://
www.novell.com/documentation/imanager25/imanager_install_25/data/hk42s9ot.html)
Role-Based Services
The iFolder 3 plug-in supports the optional use of Role Based Services (RBS) in Novell iManager.
RBS gives you the ability to assign specific tasks to iManager admin users and to present the admin
user with only the tools necessary to perform a specified set of tasks or manage only objects as
determined by their roles. What admin users see when they access iManager is based on their role
assignments in Novell eDirectory
TM
. Only the roles and tasks assigned to that user are displayed.
For information, see “Configuring Role-Based Services” (http://www.novell.com/documentation/
edir873/edir873/data/a31aexm.html) in the Novell eDirectory 8.7.3 Administration Guide (http://
www.novell.com/documentation/edir873/edir873/data/a2iii88.html)
6.5.2 Installing a Plug-In When RBS Is Not Configured
If you do not have Role-Based Services (RBS) configured for Novell eDirectory
TM
, install the
iFolder Manager Module as follows:
1 In a Web browser, log in to iManager on the iFolder server where you installed iManager.
https:// ifolder.example.com /nps/iManager.html
Replace
ifolder.example.com
with the IP address (such as
192.168.1.1
) or the DNS name
of the iFolder server.
If you installed iManager on a different server in the same tree as your iFolder server, log in to
iManager on that server.
2 In the toolbar, click the Configure icon (person seated behind a desk).
3
In Roles and Tasks, expand Plug-in Installation , then click Available Novell Plug-In Modules .
4 Locate the iFolder iManager Module plug-in, select its plug-in check box, then click Install .
This install takes a few minutes. You should receive a message confirming a successful install.
5 Click OK to dismiss the message, then close iManager.
6
Stop and start the Apache server by entering the following command at the terminal console:
/etc/init.d/apache2 restart
7 Verify that the plug-in is enabled by opening iManager in a Web browser and checking to see if
the Novell iFolder 3 plug-in appears in the list of Roles and Tasks.
For information, see
Section 6.7, “Accessing iManager and the Novell iFolder Web Admin,”
on page 86 .
8 Continue with Section 6.8, “Provisioning Users, Groups and iFolder Services,” on page 88 .