Novell IFOLDER 3.7 - SECURITY ADMINISTRATION, Руководство администратора

Страница: 60 / 216

60 OES 2 SP1: Novell iFolder 3.7 Administration Guide
no
vd
ocx
(e
n)
13
Ma
y 20
09
Novell iFolder
System
Configuration
Š
Configure SSL for iFolder: There are three options to select from.
Š
SSL: Select SSL to enable a secure connection between the iFolder
server, iFolder Web Admin server, iFolder Web Access server, and
the iFolder clients. iFolder uses the HTTPS channel for
communication.
Š
Non SSL: Select Non SSL to enable unsecured communication
between the iFolder server, Web Admin server, Web Access server
and the clients. iFolder uses the HTTP channel for communication.
Š
Both: This option is selected by default. Selecting Both enables you
to select secure or non secure channel for communication between
the iFolder server, Web Admin server, Web Access server and the
clients. By default, these components use the HTTPS (secure)
communication channel. However, all components can also be
configured to use HTTP channel.
Š
iFolder Port to Listen On: Specify the port for the iFolder to Listen On.
Port 443 is the default for SSL.
Š
Install into Existing iFolder Domain: If left unselected, this server
becomes the Master iFolder server. Select this option when you want to
use an existing iFolder domain and provide the Master server information.
IMPORTANT: You must ensure that the server you install and the current
iFolder domain are in the same LDAP tree.
Š
Private URL of the Master Server: Specify the private URL of the
Master iFolder server that holds the master iFolder data for
synchronization to the current iFolder Server. For example: https://
127.0.1.1. For more information, see the
Section 6.2.2, “Configuring
the iFolder Slave Server,” on page 65
Š
Configure LDAP Groups plugin: Select this option to configure the
LDAP Groups plug-in. If this option is left unselected, iFolder will not have
the LDAP Groups support enabled.
Novell iFolder
LDAP
Configuration
Š
Directory Server Address: The IP address shown is the default LDAP
server for this service. If you do not want to use the default, select a
different LDAP server in the list. If you are installing into an existing tree,
ensure that the server you select has a master replica or read/write
replica of eDirectory. If you need to add another LDAP server (including
Active Directory) to the list, add it using the LDAP Configuration for Open
Enterprise Services dialog. For more information on Active Directory, see
Section 5.4, “Active Directory,” on page 50 .
IMPORTANT: If you are using a DSFW server, ensure that the iFolder
Admin user and iFolder Proxy user are already present. You must use
port 1389 for non-SSL communication and port 1636 for SSL
communication.
Install Settings Description