Novell IFOLDER 3.7 - SECURITY ADMINISTRATION, Руководство администратора

Страница: 170 / 216

170 OES 2 SP1: Novell iFolder 3.7 Administration Guide
no
vd
ocx
(e
n)
13
Ma
y 20
09
3 Install iFolder as post install.
The install process itself will contact the Customer center and automatically installs the latest
patches.
You can also follow the steps given below to apply the patches.
1
Install SLES and the OES 2 components including iFolder.
2 Register for the Customer Center by following the on-screen instruction in the Customer center
wizard during installation.
3 After you complete the registration, you are notified that the upgrades are available.
4 Click Yes and install the patches to your machine.
B.3 Deployment in an Active Directory
Environment
If you are using a tree that does not depend on eDirectory
TM
, ensure that you create an iFolder Admin
user and an iFolder Proxy user if they are not already present. You must also update this information
during the YaST configuration.
B.4 Using a Single Proxy User for a Multi-Server
Setup
By default, each server creates its own Proxy user for role separation. However, you can use single
Proxy user for both master and slave servers. You can provide the Proxy DN and Proxy password for
the master server configuration and for the slave configurations. You must not use the default
configuration for the Proxy user.
B.5 Slave Configuration
Selecting Install into existing Domain during YaST configuration is considered to be a slave
configuration. If the option is not selected, the server you are configuring is considered to be a
master.
B.6 LDAP SSL Certificate
The LDAP certificate is accepted without verification if you enable the Require a Secure
Connection between the LDAP server and the iFolder Server option during YaST configuration.
B.7 Novell iFolder Admin User
By default, the LDAP admin assumes the iFolder Administrator position. You must change this
default setting during the master server configuration to have a better role separation.