Novell EDIRECTORY 8.8 SP3, Руководство администратора, Страница: 596 / 634

596 Novell eDirectory 8.8 Administration Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
If you don't, the eMBox Client will return an error saying that it cannot establish a secure
connection.
You can get these files and information about JSSE from the
Sun Web site (http://java.sun.com/
products/jsse) .
20.1.6 Finding Out eDirectory Port Numbers
When logging in to a server in the eMBox Client, you must specify a port number.
If you specified a port number when you installed eDirectory, use that number.
The default ports are as follows:
Š
For NetWare, the default nonsecure port is 8008, and the default secure port is 8009.
Š
For other platforms, the default nonsecure port is 8008, and the default secure port is 8030.
The following sections give some additional tips for finding out the port that is assigned to
eDirectory:
Š
“On Windows” on page 596
Š “On NetWare” on page 596
Š
“On Linux and UNIX” on page 597
On Windows
1 Click Start > Settings > Control Panel .
2
Double-click the Novell eDirectory Services icon, then click the Transport tab.
3 Look up the secure or nonsecure port.
Š For the nonsecure port, click the plus sign next to HTTP.
Š
For the secure port, click the plus sign next to HTTPS.
Click the plus sign next to Bound Transports to see the port number.
On NetWare
The Network Address property of a Server object will show you the ports.
You can look up the Network Address property of a server object in the following tools:
Š In iManager, look at the server object using eDirectory Administration > Modify Object , and on
the General tab read the drop down list for Network address.
Š
In ConsoleOne
®
, right-click the server object or select it and click Object > Properties , and
look for the Network Addresses drop-down list.
Look for the network addresses that begin with http: or https: and have
“/portal” at the end. These are the nonsecure and secure ports used for eMBox tools.