manualshive.com logo in svg

Novell EDIRECTORY 8.8 SP3, Руководство администратора, Страница: 490 / 634

Поделиться
Скачать
Novell EDIRECTORY 8.8 SP3 Скачать руководство пользователя страница 490

490

Novell eDirectory 8.8 Administration Guide

n

ov

do

cx (e

n)

  11
 Ju

ly 20

08

The following guidelines for each file/directory are recommended when restoring when NICI is 
already installed on the box:

16.11.2  NetWare

Before NICI 2.

x

, the configuration files were kept in 

sys:\_NetWare

 and different procedures 

apply. These instructions are valid only for NICI 2.

x

 or later.

Performing a Backup

Back up the 

sys:\system\NICI 

directory and any subdirectories and access rights. There is 

only one user on NetWare so the complication of backing up and restoring the user directories as on 
UNIX and Windows does not exist.

Restoring NICI

If NICI is not installed, restore the 

sys:\system\NICI

 directory and its contents.

If NICI is installed (as indicated by the presence of the 

sys:\system\NICI\nici.cfg

 file), 

take a backup of the existing setup and remove NICI. Copy the whole backup structure from the 
backup store to restore.

Selective restoration can be done only if the nicifk file hasn’t changed from the one on the backup 
store. If it hasn’t changed, restore whatever files in the 

sys:\system\NICI

 directory you want. 

Generally, the files should be restored as a group, but a knowledgeable operator can choose to 
restore only certain files or subdirectories.

16.11.3  Windows

Configuration information is kept in the system registry under the following key: 

HKEY_LOCAL_MACHINE\SOFTWARE\Novell\NICI.

File Name

Procedure

xmgrcfg.nif

Can be restored over an existing file.

xarchive.000

Can be restored over an existing file.

User specific directories and 
files

Take care that the userid in the backup is the same as the user on the 
box. If the user directory already exists, determined if the user wants 
to keep the current files or restore them to a previous state. Normally, 
user configuration files should be restored as a group rather than 
individually. Be sure to restore the user files under the correct user’s 
correct userid and to restore the rights on the user directory and 
contents.

For example, if BOB had userid 1000 at the time of the backup but 
now has userid 5000, the files in the backed up directory 1000 should 
be restored to directory 5000, or BOB’s UID must be changed back to 
1000. 

The restore process must not just blindly restore the user directories 
without input from the operator. In either case, a backup of the 
existing NICI user directory needs to be done.

Содержание EDIRECTORY 8.8 SP3



























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов