Novell EDIRECTORY 8.8 SP3 Скачать руководство пользователя страница 335 | Manualshive

Страница: 335 / 634

Novell EDIRECTORY 8.8 SP3 Скачать руководство пользователя страница 335

Understanding LDAP Services for Novell eDirectory

335

n

ov

do

cx (e

n)

11
Ju

ly 20

08

Examples

Assume that the file

/tmp/entrymods

exists and has the following contents:

dn: cn=Modify Me, o=University of Michigan, c=US

changetype: modify

replace: mail

mail: [email protected]

-f

file

Reads a series of lines from file, performing one LDAP search for each line. In
this case, the filter given on the command line is treated as a pattern, where
the first occurrence of %s is replaced with a line from the file. If the file is a
single hyphen (-) character, then the lines are read from standard input.

-h

ldaphost

Specifies an alternate host on which the ldap server is running.

-l

limit

Specifies the connection timeout (in seconds).

-M

Enables Manage DSA IT control. (non-critical)

-MM

Enables Manage DSA IT control. (critical)

-n

Shows what would be done, but does not actually modify entries. Useful for
debugging in conjunction with -v.

-p

ldapport

Specifies an alternate TCP

TM

port where the ldap server is listening.

-P

version

Specifies the LDAP version (2 or 3).

-v

Uses verbose mode with many diagnostics written to standard output.

-w

passwd

Uses passwd as the password for simple authentication.

-W

Prompts for simple authentication. This option is used instead of specifying the
password on the command line.

-Z

Starts TLS before binding to perform the operation. If an error occurs during
the Start TLS operation the error is ignored and the operation continues. It is
recommended that the -ZZ option be used in place of this option to cause the
operation to abort if an error occurs.

If a port is specified with this option, it must accept clear text connections.

To verify the server identity, this option should be used in conjunction with the -
e option to specify a server certificate file. This validates the server trusted root
certificate when TLS is started. If the -e option is not specified, any certificate
from the server is accepted.

-ZZ

Starts TLS before binding to perform the operation. If an error occurs during
the Start TLS operation, the operation is aborted.

If a port is specified with this option, it must accept clear text connections.

To verify server identity, this option should be used in conjunction with the -e
option to specify a server certificate file. This validates the server trusted root
certificate when TLS is started. If the -e option is not specified, any certificate
from the server is accepted.

Option

Description

«
...
333
334
335
336
337
...
»

Содержание EDIRECTORY 8.8 SP3



























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов