Novell EDIRECTORY 8.8 SP3 Скачать руководство пользователя страница 484 | Manualshive

Страница: 484 / 634

Novell EDIRECTORY 8.8 SP3 Скачать руководство пользователя страница 484

484

Novell eDirectory 8.8 Administration Guide

n

ov

do

cx (e

n)

11
Ju

ly 20

08

Because he runs the same batch file every weeknight for the incremental backups of eDirectory,
they all have the same filename. He needs to give them new names when he copies them back
onto the server, because they all must be placed in the same directory during the restore.

4. Jorge installs the replacement hard drive.

In this case, the Linux operating system for the server was not on the hard drive that failed, so
he does not need to install Linux.

5. Jorge restores the file system from tape backup for the disk partitions that were affected.
6. Jorge reinstalls eDirectory, putting the server into a new temporary tree (the restore puts it back

into the original tree again later).

7. Jorge creates an

/adminfiles/restore

directory on the server, to hold the files to be

restored.

8. He copies the full backup (the set of two files) into that directory.
9. He copies the incremental backups for Monday, Tuesday, and Wednesday nights into the

directory.
Each of them is named

backupincr.bk

, so when he copies them into the directory he

changes the filenames to

backupincr.mon.bk
backupincr.tues.bk
backupincr.wed.bk

NOTE:

Full and incremental backups aren't required to be in the same directory together, but

all the incremental backups must be in the same directory.

10. He uses iManager to restore eDirectory:

a. He goes into iManager and clicks

eDirectory Maintenance Utilities

>

Restore

.

b. He logs in to the server, using the context of the new temporary tree.

c. In the Restore Wizard - File Configuration screen, he does the following:

Enters

/adminfiles/restore

for the location where he placed the backup files.

Enters

/adminfiles/restore/restore.log

for the location where the restore

log should be created.

d. In the Restore Wizard - Optional screen, he does the following:

Checks

Restore Database

.

Checks

Restore Roll-Forward Logs

.

Enters the location of the roll-forward logs.
(This is the separate location that he created specifically to hold the roll-forward logs.
Because he placed them on a different hard drive than eDirectory, the hard drive failure
did not affect them and they are still available.)
Checks

Restore Security Files

Checks

Activate the Restored Database after Verification

.

Checks

Open the Database after Completion of Restore

.

Wants eDirectory to open if the restore verification is successful.

11. He starts the restore and enters the filenames of the incremental backup files when prompted.

«
...
482
483
484
485
486
...
»

Содержание EDIRECTORY 8.8 SP3



























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов