Novell EDIRECTORY 8.8 SP3 Скачать руководство пользователя страница 404 | Manualshive

Страница: 404 / 634

Novell EDIRECTORY 8.8 SP3 Скачать руководство пользователя страница 404

404

Novell eDirectory 8.8 Administration Guide

n

ov

do

cx (e

n)

11
Ju

ly 20

08

SLP Cache Replies:

Every time the UA receives an SLP Service reply from a DA/SA, it will be

cached/saved at the UA for the amount of time specified in the SLP Cache Replies parameter. When
SLP receives a request it will first check its cache before generating a network packet to a DA/SA. If
the cached information can be used to answer the request, it will be.

It is not recommended to set the time higher than one minute under normal SLP operations for the
following reasons:

During normal SLP communication, duplicate requests should occur within one minute of the
original request, making longer caching unnecessary.

The higher the setting, the more memory will potentially be required to cache this
information.

Table 15-11

LP Cache Replies Values

SLP Default Registration Lifetime:

This parameter determines the registration lifetime of an SLP

Service when an SA registers an SLP Service to a DA. The Novell Client not only includes the UA
capabilities, but also the SA capabilities (the same as a server), so it is possible for a client
workstation to be registering SLP services with a DA. However, it is unusual for a client workstation
to be registering an SLP Service as an SA. Developers can write applications that register SLP
Services from a client workstation using the WINSOCK 2 interface.

Examples of cases where a client workstation would register an SLP service include the following:

An NT Domain Controller running NDS4NT and a local eDirectory replica.

A Client workstation running the Compatibility Mode client (CMD) where the workstation is
advertising an SAP (for example, 0x0640). CMD will convert the SAP to SLP and register it
with any DAs the client has discovered.

A third-party application is using WINSOCK to intentionally register an SLP Service.

When the Registration Lifetime of an SLP Service expires, the DAs it is registered with will remove
this entry from its database. This is also used to determine when an SA (on a workstation or a server)
needs to reregister a service with its DAs.

Table 15-12

SLP Default Registration Lifetime Values

SLP Maximum Transmission Unit:

Exactly the same as the TCP/IP MTU, which is the maximum

size that an SLP packet can have. This setting is used to restrict the size of an SLP packet so that it
does not exceed the capability of the infrastructure and does prevent resource-intensive packet
fragmenting and reassembly.

Valid Values

1to 60,000 seconds (16.67 hours)

Default Value

1 minute

Valid Values

1to 60 minutes

Default Value

10,800 seconds

Valid Values

60 - 60,000 seconds

«
...
402
403
404
405
406
...
»

Содержание EDIRECTORY 8.8 SP3



























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов