Novell EDIRECTORY 8.8 SP3 Скачать руководство пользователя страница 457 | Manualshive

Страница: 457 / 634

Novell EDIRECTORY 8.8 SP3 Скачать руководство пользователя страница 457

Backing Up and Restoring Novell eDirectory

457

n

ov

do

cx (e

n)

11
Ju

ly 20

08

This example command would result in a full backup (-b) with the backup file placed at

c:\backups\8_20_2001.bak

and the log file for the process placed at

c:\backups\backup.log

. This command specifies that other files should be backed up

along with the database:

The files listed in an include file (-u

c:\backups\myincludefile.txt

) that was

created beforehand by the administrator.

Stream files (-t)

This example command specifies that the backup file should be overwritten (-w), so if a file of
the same name existed, the Backup eMTool would replace it.
The eMBox Client indicates whether the backup is successful.

4

Log out from the server by entering the following command:

logout

5

Exit the eMBox Client by entering the following command:

exit

6

Make sure you do a file system backup shortly after the eDirectory backup is created, to put the
eDirectory backup files safely on tape. (The Backup eMTool only places them on the server.)

16.6.2 Doing Unattended Backups, Using a Batch File with the
eMBox Client

Use a batch file to do unattended backups of eDirectory through the eMBox Client. For example,
you might want to do a full backup of eDirectory on your servers weekly and an incremental backup
nightly.

You can run the eMBox Client in batch mode using a system batch file, an eMBox Client internal
batch file, or a combination of both. For more information, see

“Running the eMBox Command

Line Client in Batch Mode” on page 592

.

This procedure describes using a system batch file.

Prerequisites

Consult the documentation for your operating system or third-party scheduling software for
instructions on how to run batch files unattended.

NOTE:

On NetWare, you can use third-party scheduling software, or

cron.nlm (http://

support.novell.com/servlet/tidfinder/2939440)

, available from the Novell Support Web site.

Make sure the eMBoxClient.jar file is on the machine you want to initiate the backup from.
The file is installed on your server as part of eDirectory. You can copy it from there and run it
on any machine with Sun JVM 1.3.1. You can run backups for multiple servers from a single
machine if you have access behind the firewall. For more information, see

Section 20.1, “Using

the eMBox Command Line Client,” on page 588

.

If you are planning to use roll-forward logs for this server, make sure they are turned on before
a backup is made.

«
...
455
456
457
458
459
...
»

Содержание EDIRECTORY 8.8 SP3



























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов