Novell BUSINESS CONTINUITY CLUSTERING 1.1 SP2 - ADMINISTRATION, Руководство администратора

Страница: 86 / 142

86 BCC 1.1 SP2: Administration Guide for NetWare 6.5 SP8
no
vd
ocx
(e
n)
13
Ma
y 20
09
7.3.2 Using Console Commands to View the Cluster Status
At the server console of a server in the business continuity cluster, enter the following commands to
get different kinds of status information:
cluster view
cluster status
cluster connections
7.4 Generating a Cluster Report
You can generate a report for each cluster in the business continuity cluster to list information on a
specific cluster, such as current cluster configuration, cluster nodes, and cluster resources. You can
print or save the report by using your browser.
1
Start your Internet browser and enter the URL for iManager.
The URL is http://
server_ip_address /nps/iManager.html. Replace server_ip_address with the
IP address or DNS name of the server that has iManager and the Identity Manager
preconfigured templates for iManager installed.
2 Specify your username and password, specify the tree where you want to log in, then click
Login .
3 In the left column, click Clusters , then click the Cluster Manager link.
4 Specify a cluster name, or browse and select one.
5 Click the Run Report button.
7.5 Disabling Business Continuity Cluster
Resources
After enabling a resource for business continuity, it is possible to disable it. You might want to
disable BCC for a cluster resource in any of the following cases:
Š You accidentally enabled the resource for business continuity.
Š
You no longer want the cluster resource to be able to fail over between peer clusters.
Š You plan to delete the cluster resource.
Š
You plan to remove the peer cluster from the business continuity cluster. In this case, you must
disable BCC for each cluster resource before you disable BCC for the cluster.
IMPORTANT: If you disable Business Continuity Clustering for a cluster by using either iManager
or the
cluster disable
console command, the cluster resources in that cluster that that have been
enabled for business continuity are automatically disabled for business continuity. If you re-enable
Business Continuity Clustering for the cluster, you must again re-enable each of its cluster resources
that you want to be enabled for business continuity.
This can be a time-consuming process if you have many cluster resources that are enabled for
business continuity. For this reason, you should use caution when disabling Business Continuity
Clustering for an entire cluster.