Novell BUSINESS CONTINUITY CLUSTERING 1.1 SP2 - ADMINISTRATION, Руководство администратора, Страница: 61 / 142

Upgrading Business Continuity Clustering for NetWare 61
no
vd
ocx
(e
n)
13
Ma
y 20
09
2 Delete the Identity Manager 2. x drivers and driver sets on the Identity Manager node of every
peer cluster.
3
Perform a rolling cluster upgrade from NetWare 6.5 SP6 to SP8 for all nodes in a peer cluster:
3a Issue the
cluster leave
command on one node in the cluster.
3b
Upgrade NetWare 6.5 from version SP6 to SP8, and apply the latest patches for NetWare
and Novell Cluster Services.
You can perform a script upgrade by using NWCONFIG.
For information, see
“3.0 Upgrading to OES 2 SP1 NetWare” (http://www.novell.com/
documentation/oes2/inst_oes_nw/data/b7211uh.html) in the OES 2 SP1: NetWare
Installation Guide.
3c If the node is running iManager, update the storage related plug-ins for iManager.
After upgrading to NetWare 6.5 SP8, iManager no longer displays the roles for Clusters,
Storage, and DirXML. The storage related plug-ins require special handling because some
storage features were reorganized in the NetWare 6.5 SP8 release. For information, see
“Storage Related Plug-Ins Must Be Uninstalled” (http://www.novell.com/documentation/
oes2/oes_readme/data/bi59826.html#biv1r9v)
in the OES 2 SP1 Readme (http://
www.novell.com/documentation/oes2/oes_readme/data/readme.html) .
NOTE: The DirXML plug-ins will be replaced by Identity Manager 3.5.1 plug-ins in
Step 5 on page 62 .
3c1 In iManager, uninstall the old iManager plug-ins for Novell Cluster Services
(ncsmgmt.npm
), NSS (
nssmgmt.npm
), Archive and Version Services
(
arkmgmt.npm
), and Storage Management, (
storagemgmt.npm
).
3c2 In iManager, install the new set of storage-related plug-ins for iManager 2.7.2 from
the NetWare 6.5 SP8 installation media:
Novell AFP (
afpmgmt.npm
)
Novell Archive and Version Services (
arkmgmt.npm
)
Novell CIFS (
cifsmgmt.npm
)
Novell Cluster Services
(ncsmgmt.npm
)
Novell Distributed File Services (
dfsmgmt.npm
)
Novell Storage Services (
nssmgmt.npm
)
Storage Management, (
storagemgmt.npm
)
3c3 Stop Tomcat 5 by issuing
tc5stop
command.
3c4 Reset Apache 2 by using the
ap2webrs
command.
3c5 Start Tomcat 5 by using the
tomcat
command.
3c6 Wait at least 5 minutes for the iManager changes to take effect, then restart iManager.
3c7 In iManager, verify that BCC tasks are available in the Clusters role.
3d Repeat Step 3a through Step 3c7 for each node in the cluster.
4 On each node in the cluster, upgrade Business Continuity Clustering from version 1.1 SP1 to
1.1 SP2 by installing BCC 1.1 SP2.
IMPORTANT: Do not start BCC at this time.
For instructions, see Chapter 4, “Installing Business Continuity Clustering,” on page 37 .