Novatel SMART2 Series, Инструкция по установке и эксплуатации, Страница: 34 / 76

SMART2 Operation
SMART2 Installation and Operation Manual 1 34
3.8.1 Selecting the Logs to Collect
The logs configured to be collected are shown in the bottom portion of the screen.
To add logs:
1. Click the
+ Add Log button. The Add Logs dialog box opens.
2. Click the check box for each log you want to add.
The logs are listed alphabetically and are organized on tabs by category.
If the log name is known, enter the log name, or a portion of the log name, in the search
box. The search starts as soon as text is entered. The search works within the selected tab,
so if the log is not found, click on the other tabs to search those tabs.
3. After the logs required are selected, click the Add button.
The selected logs are added to the Logging Control Window with default logging parameters.
To remove a log from the set of logs to be collected:
1. Click the red X button beside the log.
3.8.2 Modify the Logging Parameters
Each log on the Logging Control Window has three parameters that affect how the log is col-
lected.
l
Format
Logs can be generated in Binary or ASCII format. For information about these formats, refer
to Binary and ASCII.
l
Trigger
The trigger determines the schedule on which the log is collected. The trigger selected
depends on the information required and the type of log. For more information about trig-
gers, refer to Log Types and the
LOG command.
l
Destination
The destination determines where the log is sent. The log can be sent to any communication
port on the receiver or a file on the computer running NovAtel Connect.
If a communication port is selected, ensure that a device to receive the log is connected to
that port.
The filename and directory used when collecting to a file is configured in the Settings dialog
box. Refer to Change the Log File Settings on the next page.
3.8.3 Start Collecting Logs
To start collecting logs:
1. Ensure that the logs you want to collect are shown on the Logging Control Window.
2. Click the
Start Recording button.
The button changes to Stop Recording.
If logs are being collected in a file on the computer, the file name used and a running total of
the file size appears.
3.8.4 Stop Collecting Logs
To stop collecting logs: