Novatel MiFi2200 Скачать руководство пользователя | Manualshive

Страница: 77 / 85

background image

76

SAR Levels

The FCC has granted an Equipment Authorization for this wireless modem with all reported SAR
levels evaluated as in compliance with the FCC RF exposure guidelines.

Proper Battery Use and Disposal

IMPORTANT!

In the event of a battery leak:

•

Do not allow the liquid to come in contact with the skin or the eyes. If contact is made,
wash the affected area with large amounts of water and seek medical advice.

•

Seek medical advice immediately if a battery has been swallowed.

•

Communicate the appropriate steps to be taken if a hazard occurs. Due to the
transmission and reception properties of wireless communications, data occasionally
can be lost or delayed.

Contact your local recycling center for proper battery disposal.

Guidelines for Safe and Responsible Battery Use

•

Never dispose of batteries in a fire because they might explode.

•

Do not disassemble or open, crush, bend or deform, puncture, or shred.

•

Do not modify or remanufacture, attempt to insert foreign object into the battery, immerse
or expose to water or other liquids, or expose to fire, explosion, or other hazard.

•

Only use the battery for the system for which it was specified.

•

Only use the battery with a charging system that has been qualified with the system per
this standard. Use of an unqualified battery or charger may present a risk of fire, explosion,
leakage, or other hazard.

•

Do not short circuit a battery or allow metallic or conductive object to contact the battery
terminals.

•

Replace the battery only with another battery that has been qualified with the system per
this standard. Use of an unqualified battery may present a risk of fire, explosion, leakage, or
other hazard.

•

Promptly dispose of used batteries in accordance with local regulations.

•

Battery usage by children should be supervised.

•

Avoid dropping the device or battery. If the device or the battery is dropped, especially on a
hard surface, and the user suspects damage, take it to a service center for inspection.

•

Improper battery use may result in a fire, explosion, or other hazard.

«
...
75
76
77
78
79
...
»

Содержание MiFi2200






















































































Отзывы:

Нет отзывов

Похожие инструкции для MiFi2200

Бренд: Icom Страницы: 2

RouterBOARD 750

Бренд: MikroTik Страницы: 2

Бренд: Aruba Страницы: 15

Бренд: Medialink Страницы: 105

Бренд: Linksys Страницы: 123

BLUESOCKET 3040

Бренд: ADTRAN Страницы: 6

BLUESOCKET 2135

Бренд: ADTRAN Страницы: 8

Бренд: Ubiquiti Страницы: 15

Бренд: ConnectGear Страницы: 11

Бренд: ConnectGear Страницы: 36

Бренд: Icom Страницы: 88

Бренд: Nanosat Страницы: 11

Бренд: Novatel Страницы: 70

Бренд: DCP Страницы: 86

Бренд: BroadLink Страницы: 21

Бренд: Fortress Technologies Страницы: 8

3CRWE454G72-US - Corp OFFICECONNECT WIRELESS 11G

Бренд: 3Com Страницы: 102

Бренд: Sapido Страницы: 102

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды