Novatel MiFi2200 Скачать руководство пользователя страница 67

Страница: 67 / 85

Common Problems and Solutions

The following are some common problems and solutions.

No service is available, or I get a "Limited" or "No Connectivity" message.

➤

You may be outside of the coverage area.

➤

Check with your network operator — there may be a problem with your account.

➤

Reorient the MiFi device.

➤

If you are inside a building or near a structure that may be blocking the signal, change the

position or location of the device. For example, try moving the MiFi device close to a window.

The device has no power.

The LED indicator is off and does not come on when the Power button is pressed.

➤

Ensure the battery is properly seated in the device.

➤

Ensure the battery is fully charged. Plug in the wall charger for at least 2.5 hours.

My MiFi device powered off once I plugged it into the wall charger.

This can occur if power settings are activated after it is plugged in.

➤

Press the power button to turn it back on.

My MiFi device just powered off without my pressing the power button.

This can occur in the following situations.

•

Pressing the

Master Reset

button

•

Restarting the device

•

Switching profiles

•

Restoring the configuration settings

•

Battery depleted

➤

Press the power button to turn it back on.

I forgot my password.

➤

You can reset the device to factory defaults using the Master Reset button. (See

Use the Master

Reset Button

on page 69.)

Содержание MiFi2200






















































































Результаты поиска

Содержание MiFi2200

Отзывы:

Бренды по названию

Популярные бренды

Novatel MiFi2200, Руководство пользователя

Результаты поиска

Содержание MiFi2200

Отзывы:

Бренды по названию

Популярные бренды