Novatel MiFi2200 Скачать руководство пользователя

Страница: 75 / 85

NOTICE TO CONSUMERS:

Any changes or modification not expressly approved by the party

responsible for compliance could void the user’s authority to operate this equipment.

NOTE:

The Radio Frequency (RF) emitter installed in your modem must not be located or operated

in conjunction with any other antenna or transmitter, unless specifically authorized by Novatel
Wireless Technologies.

MODIFICATIONS:

The FCC requires that you be notified that any changes or modifications made to

this device that are not expressly approved by Novatel Wireless may void your authority to operate
the equipment.

RF Exposure

FCC Equipment Authorization ID: PKRNVWMIFI2200

This device is only authorized for use in Mobile applications. At least 8 inches (20 cm) of separation
between the antenna and the user’s body must be maintained at all times.

Содержание MiFi2200






















































































Результаты поиска

Содержание MiFi2200

Отзывы:

Похожие инструкции для MiFi2200

Бренды по названию

Популярные бренды

Novatel MiFi2200, Руководство пользователя

Результаты поиска

Содержание MiFi2200

Отзывы:

Похожие инструкции для MiFi2200

Бренды по названию

Популярные бренды