Novatek-electro REV-114, Руководство по эксплуатации

Страница: 5 / 12

- 5 -
NOVATEK-ELECTRO REV-114
Table 3
– Product operation mode
Mode number and
name
Description
1
On-delay
After energizing, the indicator ON (Fig.1 it.10)
is on and the set delay time occurs .
During the delay time the indicator
(Fig.1 it.9) periodically flashes.
At the end of the delay time the load relay
contacts
C and NO are closed, the indicator
is on and the product goes into standby
mode until power-off.
2
Time delay when
energizing
After energizing, the indicator ON (Fig.1 it.10)
is on, contacts of the load relay C and NO are
closed, the indicator
(Fig.1 it.9) is on and the set delay time occurs
. During the delay time the indicator
periodically is off.
At the end of the delay time the load relay
contacts are open, the indicator
is off
and the product goes into standby mode until
power-off.
3
Periodic with on-
delay
After energizing, the indicator ON (Fig.1 it.10)
is on and the set delay time occurs .
During the delay time the indicator
(Fig.1 it.9) periodically flashes.
At the end of the delay time the load relay
contacts
C and NO are closed for set time
and the indicator is on. During
the delay time the indicator periodically
is off.
At the end of the delay time the load relay
contacts are open, and the product starts fulfillment of algorithm from the beginning.
4
Periodic with time
delay when
energizing
After energizing, the indicator ON (Fig.1 it.10) is
on, contacts of the load relay C and NO are
closed, the indicator
(Fig.1 it.9) is on and the set delay time occurs
. During the delay time the indicator
(Fig.1 it.9) periodically is off.
At the end of the delay time the load relay
contacts are open for set time and the
indicator is off. During the delay time the
indicator periodically flashes.
At the end of the delay time the product starts fulfillment of algorithm from the beginning.
5
Pulse generator
After energizing, the indicator ON (Fig.1 it.10)
is on and the set delay time occurs .
During the delay time the indicator
(Fig.1 it.9) periodically flashes.
At the end of the delay time the load relay
contacts
C and NO are closed, and the set
delay time occurs .
During the delay time the indicator
(Fig.1 it.9) periodically is off.
At the end of the delay time the load relay
contacts
C and NO are open, the indicator is off and the product goes into standby
mode until power-off.