Novatek-electro REV-114, Руководство по эксплуатации

Страница: 3 / 12

- 3 -
NOVATEK-ELECTRO REV-114
This Operation Manual is intended to familiarize you with arrangement, the requirements for safety, operation and
maintenance procedures of the time delay relay REV
–114
(hereinafter referred to as the "product", "REV
–114").
The product meets the requirements of the following:
IEC 60947-1 (Low-voltage switchgear; Part 1. General rules);
ІEC 60947-6-2 (Low-voltage circuit breaker and controller; Part 6-2; multifunctional equipment; Control and safety
switching equipment);
CISPR 11 (Electromagnetic compatibility; Industrial, scientific and medical RF equipment; electromagnetic interference
characteristics; standards and measuring procedure);
IEC 61000-4-2 (Electromagnetic compatibility; Part 4-2; Testing and measurement techniques; Electrostatic discharge
immunity test).
Harmful substances in amounts exceeding maximum permissible concentrations are not available.
Terms and abbreviations:
•
It periodically flashes
– the indicator short-time enabling.
•
It periodically is off
– the indicator short-time disabling.
1. APPLICATION
1.1. Product application
The time delay relay REV-114 is the microprocessor-based device intended to control the load with independent time
delay. It provides the certain sequence of the load operation according to the mode specified by the user.
REV-114 is equipped with control buttons and a digital display designed for adjustment and visual check of
timing.
REV-114 can be operated by seventeen operation algorithms:
- on-delay;
- time delay when energizing;
- periodic with on-delay;
- periodic with time delay when energizing;
- pulse generator;
- on-delay with external start;
- off delay with external start;
- pulse I with external start;
- pulse II with external start;
- on/off delay with external start;
- pitch of the load relay (during each control contact closing);
- periodic with external start and on-delay;
- periodic with external start and time delay when energizing;
- pulse generator with external start;
- start stop;
- always ON;
- always OFF.
1.2. Controls, overall and mounting dimensions of REV
–114
Controls, overall and mounting dimensions are shown in Fig.1.
1
– input contacts ~230/240 V
N , L ;
2
– input control contact
S ;
3
– digital indicator display;
4
– button
(UP);
5
– button
(DOWN);
6 , 7
– output contacts of load relay
( NO , C , NC );
8
– LED indicator of setup mode
prg ;
9
– LED indicator of load relay ON
;
10
– LED indicator of power ON
On .