Novanta NDS ScaleOR, Руководство пользователя

Страница: 27 / 40

Serial Port Setup and Test
Hardware Setup
Turn the ScaleOR on. Connect your PC to the ScaleOR using a USB to Mini 5 USB (NDS P/N 35Z0047) or
equivalent cable.
Device Manager
Open the Device Manager, and select Ports (COM & LPT). Find the USB Serial Port (COMx) entry. Use the
port number in the ( ) when you setup Hyper Terminal.
Hyper Terminal Setup
The table below shows the serial port parameters.
Click Start.
Select All Programs > Accessories > Communica ons
Click Hyper Terminal.
Enter a name for the new connec on and click OK.
In the Connect To menu, select the COM port number that matches the USB Serial Port you found using
the Device Manager from the Connect Using drop down menu and click OK.
In the COM Proper es menu:
Set Bits per second to 19200
Set Data bits to 8
Set Parity to None
Set Stop bits to 1
Set Flow control to None
Click OK
Click File, click Proper es, then select ASCII Setup from the Proper es menu.
In the ASCII Setup menu select:
Echo typed characters locally.
Click OK to exit ASCII Setup
Click OK to exit configura on. Click File and select Save to save the configura on.
Serial Port Test
Place the cursor in the text area of the Hyper Terminal window and press Enter, !0003C3 is displayed.
Type :0000000080 and press Enter.
!000058J0079RBBxx is displayed. Where:
! = Start of response.
0000
= Response OK.
58J = BIOS type.
0079 = BIOS number.
R = Revision le er.
BB = Build number (minor revision).
xx = Checksum
A complete set of ScaleOR serial commands is available. See the General Informa on sec on on page 2.
Parameter Setting
Baud Rate 19200
Parity None
Data Bits 8
Stop Bits 1
Flow Control None
7
19