Novanta NDS ScaleOR, Руководство пользователя

Страница: 16 / 40

8
Power Supply and Wall Adapters
The power supply is shown with the US wall adapter installed. To exchange the adapter, proceed as
follows:
The ScaleOR with fixed DVI and SDI output connectors uses the power supply as the power source.
The ScaleOR with fixed DVI and HDBaseT output connectors uses Power over Ethernet (PoE) through the
HDBaseT port as the default power source. An op onal power supply is available.
Place the power supply on your work surface as shown.
Press and hold the bu on labeled PUSH .
Twist the adapter 1/8 turn toward the OPEN arrow, and li it off the power supply.
Select one of the provided wall adapters.
Align the tabs on the bo om of the adapter with the notches on the power supply and place the adapter on
the power supply. Press the adapter down and twist it toward the LOCK arrow un l it clicks into place.
GTM91120-3024-T3A, 24Vdc