Novanta NDS ScaleOR, Руководство пользователя

Страница: 13 / 40

5
3
Electrical Symbols
Output Mode Switches
The Output Mode Switches , accessible on the
underside of the unit, allow the user to select
1 of 46 output modes. The Output Mode
Switch Se ngs table on the following page
shows the switch se ngs required to select a
given output mode. Se ng the output mode
from the On Screen Menu ( OSM ) requires that
all switches be set to off.
Power Switch:
The Power Switch symbol is shown to the le .
The power switch is push on / push off and is shown below the Power Switch symbol. When the
switch is off, the ring around the center por on is white. When the switch is on, the center
por on is depressed and the ring is illuminated blue. The illustra on shows the switch in the
ON state. When the ScaleOR is turned on the blue ring flashes at the rate of 5 flashes per
second for 15 seconds then, becomes steady when a video signal is detected. If a video signal is
not detected the ring con nues flashing at the rate of 1 flash per second.