MicroE Optira Installation Manual
Celera Motion
IM-1001 | REV181211
Page 25
©2018 Celera Motion
•
If removed from the mounting surface for any reason, they should not be used for any
kind of re-application. This will affect the performance and reliability of the encoder
system.
The adhesive on the Optira tape scale is permanent:
•
DO NOT touch the adhesive once the adhesive backing is removed.
•
DO NOT remove the tape scale from the mounting surface once it has been installed.
•
DO NOT reinstall the tape scale if it has already been installed once. If the tape scale is
removed and reinstalled again, the encoder performance will be degraded.
•
Avoid any contamination to the adhesive. Any particulate matter or contamination trapped
between the scale and the mounting surface will affect encoder performance.
•
Optira tape scale is not recommended for applications on a radius. Contact MicroE for
support.
