Manual, F/T Sensor, Ethernet Axia
Document #9620-05-C-Ethernet Axia-02
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel:+1 919.772.0115 • Fax:+1 919.772.8259 •
C-56
3.
After a terminal window opens, the session prompts a user to enter a
Login
(or username) and
Password
. The Login is “ati”; the password is “ati7720115”.
NOTICE:
Users can also log into the console with a user-defined username and password that
can be set with a CAL/SET command (
) or through the
Communications
webpage
(
Section 6.7—Communication Page (comm.htm)
).
5.
, press the (enter) key to
send the command.
NOTICE:
Commands are not case sensitive.
Figure 8.2
—PuTTY Terminal Window
8.2 Console Commands
These console commands can be used to view the status, parameters, and adjust settings of the sensor.
Table 8.1—Commands
Command
Operand(s)
Description
HELP
Not Applicable
The help command reports a list of the
console commands and software version.
H
MAN
?
