CHANGE ZONES - ENABLE/DISABLE STATUS
By using
CURSOR KEYS
, enter the desired zone number.
By pressing ENTER key, the current status of the selected zone will be
displayed.
Press
ENTER
to Disable or Enable.
If you do not want to change the zone status, press
ESC
.
»
NOTE: A)
CHANGE DAY-NIGHT MODE
By pressing
ENTER
, the display will show the control panel status
To change it, press
ENTER
.
•
NIGHT= Day/Night LED= Turned OFF
•
DAY= Day/Night LED = Turned ON
If you do not want to change the control panel status, press
ESC
.
DISPLAY HISTORICAL LOG
Press
ENTER
to display the Historical Log Function.
Use
CURSOR KEYS
to display the events
Press
ESC
to leave the Historicl Log Function
»
NOTE: Historical Log may store maximum 50 events.
To display the Historical Log, enter the Level 2 PASSWORD.
CFP-600-Prog-1.VP
Installation and Operating Manual
Page 5
Doc. M-131.1-CFP600-ENG
Rev. B.1
NOTIFIER ITALIA
USER MODE
|A08
ENA./DIS.ZONE |G08
|D00
|E00
ENA./DIS.ZONE |A08
Z.
|G08
|D00
|E00
ENA./DIS.ZONE |A08
Z. 01 NORMAL
|G08
|D00
Modify Exit
|E00
Zone Status
Detector Alarms
Detector Troubles
Enabled
YES
YES
Disabled
NO
YES
Excluded
NO
NO
B) if a zone is DISABLED, it detects only troubles.
(See config. Menu - Lev.4 about “Exclusion function”)
USER MODE
|A08
DAY-NIGHT
|G08
|D00
|E00
|A08
>NIGHT<
|G08
|D00
Modify
Exit |E00
USER MODE
|A08
HISTORICAL LOG |G08
|D00
|E00
HISTORICAL LOG |A08
01: 14-04 17:31|G08
Z.01
ALARM
|D00
HIST. LOG
|E00
Date
Event nr.
Zone nr.
HOURS-MINUTES
Event
Programmable
Label mapped
to the zone
