Norton clipper CHW Series, Руководство по эксплуатации

Страница: 13 / 23

13
Picture 4 : unlocking of the anti-tipping device
4.2 Transport procedure
The machine can be moved on a flat surface using its wheels. You must first fold away the feet. Lift
the rear handle and push lightly on the rear foot of the machine with your foot. The foot of the
machine will automatically fold away. You can then put the rear of the machine on the floor. Then
proceed the same way with the front foot.
4.3 Long period of inactivity
If the machine is not going to be used for a long period, please take the following measures:
•
Completely clean the machine
•
Empty the water system
•
Take the water pump out of the slurry and clean it thoroughly.
The storage site must be clean, dry and at a constant temperature.
5 Operating the machine
5.1 Site of work
5.1.1 Siting the machine
•
Remove from the site anything, which might hinder the working procedure!
•
Make sure the site is sufficiently well lit!
•
Observe manufacturer's conditions for connecting to power supplies!
•
Place electric cables in such a way that damage by the device is excluded!
•
Make sure you have a continual adequate view of the working area so you can intervene in the
working process at any time!
•
Keep other staff out of the area, so you can work securely.
5.1.2 Space required for operation and maintenance
Leave 2 m in front of the machine and 1,5 m around it for usage and maintenance of the CHW.
5.2 Cutting methods
To use the machine correctly, you must face it with one hand on the handle of the cutting head, and
the other on the conveyor cart. Always keep your hands away from the moving blade. Open the
switch cover and press the green button to start the machine. To stop either use the red button or
press directly on the switch front cover.