Norton Clipper C13PE, Руководство пользователя

Страница: 12 / 36

12
Never transport the machine with the Fuel Valve in the ON
position. Never Store the machine with the Fuel Valve in the
ON position. Never Transport a machine with the blade
installed.
C14PE 14HP Subaru
1. Refer to the engine owner's manual for detail starting procedures.
2. Always cut with engine rpm in the full throttle setting.
Before starting, insure that the blade is properly installed,
all guards are in place and in safe operating condition, and
that the Blade is not in contact with any surface or object.
Also verify that the area where the work is to be performed
is clean, safe, and has proper ventilation and lighting.
Always located and properly mark all water, gas, and
electrical services before beginning any work.
Turn the Fuel Control To the ON Position
Move the choke lever to the CLOSED position.
NOTE: The Choke may not be needed if the engine
is warm or the air temperature is high.
Move the Engine Throttle to 1/3 the way to the high
position.
Place the engine ON/OFF switch to the ON position
and NOTE: The Engine ON/OFF Switch is located
on the front of the Engine.
ON/OFF
Switch