Norton Clipper C13PE, Руководство пользователя

Страница: 15 / 36

15

Understand and follow all of the instructions in this owner’s manual.

If wet cutting, turn on the water supply so that there is a minimum of 4-6
gallons per minute of water flow!!

In critically hard aggregate, more than a single pass may be needed to cut
the desired depth.

If the saw stalls in the cut, immediately stop the forward speed and raise the
blade out of the cut. If this is not done the belts can fail or the blade may be
damaged.

Go slowly with a new blade until it opens up, that is, until the diamonds can
be seen and felt.
III. MAINTENANCE
A. Engine
Follow the below schedule for engine maintenance. NOTE: Check the Honda
Engine manual that came with the engine for any changes to the maintenance
schedule. If the charts have any differences, follow the chart in the Honda
Engine Manual. Norton does not warranty the engine. If any warranty or
service of the engine is required contact your nearest Honda service center, or
from the Internet:
http://engines.honda.com/dealer-locator
Honda engine (refer to owner's manual for complete maintenance.)
Honda Engine Maintenance Schedule