Low Voltage
Control
Wiring
Incoming
Power
Optional Bracket
(for surface wiring)
Ground
Lead
Power
Leads
Ground
Screw
(Green)
Cable
Clamps
Conduit
by Others
(from top)
“T1” Power
Input
Terminal
24
23
22
25
HOT
COM
Breaker Switch
T1 Terminal
Block
4. Final Electrical and Mechanical Setup
A. Confirm all mechanical adjustments have been made
and wiring connected per Page 7 and 8.
B. Turn on facility’s main circuit breaker.
C. Turn power to unit on at the Unit Power Switch and
turn the Breaker Switch to “RESET”.
D. Using a short jumper cable, jump terminals 1 and 2,
see Fig. 2 below, to activate unit. When door
reaches 20°, switch Breaker Switch to “OFF”
position cutting power to the unit. Allow door to
fully close (door may be manually pulled closed).
1
2
3
4
1
2
3
4
Figure 2
3. Input Power Configurations
CONCEALED WIRING
SURFACE WIRING
Ground Wire Connection – Ground wire must be secured to backplate
under head of (green) ground screw .
Terminal
Description
HOT
25
23
24
22
COM
Common power lead
Hot power lead
Circuit Breaker
Switch
Circuit Breaker
Common connection to Circuit Breaker /
Inverter
Thread conduit fitting(s) into backplate as shown. A second
conduit fitting is required for low voltage control wiring. CHECK
LOCAL CODES. Pull conduit out of header and attach to conduit
fittings before mounting Secure operator to door frame. Attach
incoming ground wire to backplate with ground screw as
illustrated in “Surface Wiring” illustration to the Right.
Thread conduit fitting(s) into backplate as shown. A second
conduit fitting is required for low voltage control wiring. CHECK
LOCAL CODES. Pull conduit out of header and attach to conduit
fittings before mounting Secure operator to door frame. Attach
incoming ground wire to backplate with ground screw as illustrated
below.
Breaker
Switch
Unit Power Switch
Page 8
ASSA ABLOY
Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.
Copyright © 2015 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
80-9357-0008-020 (Rev 3)
