Fail Secure / Fail Safe Electric Strike Wiring
120VAC
Supplied by
Others
-
+
DC or AC
Output
A
C or DC
Electr
ic Str
ik
e
+
-
Wall Switch, Card
Reader, Key Switch,
etc.
Normally Open Momentary
dry contacts
Notes:
1.Power input to Door Operator Unit is at “T1”
Power Input Terminal (not shown) 120VAC
60Hz.
2.Unit’s Relay Rating for strike interface:
30VDC @ 1A or 125VAC @ .5A
Operation:
•
•
Activating switch will unlock the electric strike
and the door will automatically open. Door will
close after hold open time delay has elapsed
•
For Fail Secure Strike - The door will remain
locked during power failure
•
For Fail Safe Strike - The door will remain
unlocked during power failure.
Door is normally closed and latched.
1
2
3
4
1
2
3
4
JMP503
NC
NO
Jumper Settings
Place jumper to upper
position for normally
closed operation or to
lower position for
normally open operation.
Fail Safe Electromagnetic Lock 24VDC Wiring
1
2
3
4
1
2
3
4
Wall Switch, Card
Reader, Key Switch,
etc.
Normally Open Momentary
dry contacts
+
-
24VDC Electromagnetic Lock
(Fail Safe)
Operation:
•
•
Activating switch will cut power to mag lock and the door will automatically
open. Door will close after hold open time delay has elapsed.
•
The door will unlock during power failure.
Door is normally closed and latched.
Notes:
1.Power input to Door Operator Unit is at “T1”
Power Input Terminal (not shown) 120VAC
60Hz.
2.Unit’s Relay Rating: 30VDC @ 1A or
125VAC @ .5A
Jumper Settings
Place jumper to upper
position for normally closed
operation or to lower position
for normally open operation.
JMP503
NC
NO
120
VAC
Ground
COM
HO
T
L N
(AC)
-V +V
ADJ
+
Optional 1.1A 24V
Power Supply
Page 11
ASSA ABLOY
Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.
Copyright © 2015 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
80-9357-0008-020 (Rev 3)
