A–22
N-1000-III/IV
N-1000-III/IV
N-1000-III/IV
N-1000-III/IV
N-1000-III/IV
Appendix A: Quick Reference Guide
Output Groups by Readers
Output Groups by Readers
Output Groups by Readers
Output Groups by Readers
Output Groups by Readers
This feature allows a card to be used to activate one group when it is used at
Reader 1 and a different group if it is used at Reader 2.
1. Initialization must include the E Option and the G designation with a number
following it. The number following the G will tell the panel that groups with a
number higher than this number are to be used in the split method. If the
number is EVEN, the jump described below will be 1. If the number is ODD, the
jump will be 2. The ODD/EVEN distinction is used to distinguish the situation of
regular groups, described here, from that of Paired Special Groups.
2. In setting up the groups and assigning them with access levels, it is necessary to
keep in mind that group numbers higher than the number specified in the I
command will be incremented by 1 when the card is used at Reader 2. (If the
number above was EVEN. If the number above was ODD it will be incremented
by 2.) The original group number will be used at Reader 1.
Example:
_
I
=pn_
E
_
G
_4<CR>
_
C
=pn_444_1_1_2_
G
_3<CR>
_
C
=pn_555_1_1_2_
G
_7<CR>
Card 444 will pulse group 3 on either reader but card 555 will pulse
Group 7 on Reader 1 and Group 8 on Reader 2.
Содержание N-1000-III
Страница 1: ...N 1000 III IV Installation and Programming Manual TD1064 rev0400 NCI ADEMCO Part K4788 ...
Страница 3: ...ii ii ii ii ii N 1000 III IV ...
Страница 77: ...7 2 N 1000 III IV N 1000 III IV N 1000 III IV N 1000 III IV N 1000 III IV Section 7 Locks and Suppression ...
Страница 120: ......