Nortel SRG50, Руководство по настройке

Страница: 21 / 111

Chapter 1 Getting started 21
Survivable Remote Gateway 50 Configuration Guide
Process map for installing and configuring an SRG50
Figure 3 Process map for installing and configuring an SRG50
Locate the BCM50 that will be
converted to the SRG50.
Install the physical components,
including expansion units, media bay
modules, cabling, telephones, and
peripherals, as per the
BCM50
Installation & Maintenance Guide
The main office is installed and running and the
information to support SRG50 has been configured.
Complete the initial installation,
connect the SRG50 to the LAN (as
required) and WAN (to main office),
and test the SRG50 system, as per
the
BCM50 Installation &
Maintenance Guide (N0027152).
Configure the basic parameters of the
BCM50 as per the
BCM50 First Time
Installation and Configuration Guide
(N0027149). (Refer to the BCM50
Installation & Maintenance Guide
(N0027152) and the BCM50
Administration Guide (N0016868) as
required for detailed instructions).
Set up SRG50 administration, and
carry out non-SRG-specific
networking and device configuration
as per the
BCM50 Administration
Guide (N0016868), the BCM50
Networking Configuration Guide
(N0027156), and the BCM50 Device
Configuration Guide (N0027146).
You have reviewed the SRG50 and BCM50
system requirements and documentation.
Install and configure attached
devices, as per the IP telephone and
analog device installation and
configuration guides, as required.
(Refer to
“Setting up IP telephones”
on page 63 when configuring the IP
telephones. Refer to “Considerations
for PSTN access and analog
devices” on page 91
when setting up
analog trunks and devices.)
Configure the server-specific data for
the applicable main office call server.
Refer to the server-specific chapters
(
“CS 1000 considerations” on page
33 and “CS 2000 considerations” on
page 53 ).
Set up the private VoIP network, as
per
“Setting up the private VoIP
network” on page 75 .
Set up the IP telephones for SRG
operation, as per
“Setting up IP
telephones” on page 63 .
Test the telephones and analog
equipment in normal mode.
Familiarize users with the services for
local mode. (
“” on page 101 )
Troubleshoot any registration issues
(
“Troubleshooting” on page 95 ).
Register each telephone
with the main office and the
SRG50.
Create the SRG50 as per the
Survivable Remote Gateway 50
Configuration Guide
.