Nortel SRG50, Руководство по настройке

Страница: 59 / 111

Chapter 4 CS 2000 considerations 59
Survivable Remote Gateway 50 Configuration Guide
To enter the MODN
1 On the SRG50 Element Manager, navigate to Configuration > Resources > Survivable
Remote Gateway .
2
Select the CS2000 IP Terminal Details tab (Figure 8) .
3 Refer to the information recorded in “Step 2: Record numbers and models (call forwarding
only)” on page 57 .
4 Select the required DN.
5 Press the Modify button.
6 Enter the MODN in the MODN field.
Status Read-only Current status of the telephone.
Refer to “IP terminal details” on page 96 (expand the field to read the entire
status message).
Main Office
DN (MODN) Required for call forwarding. Leave blank if call forwarding is not required.
If provisioned, the SRG50 invokes a Call Forward All Calls to the MODN when
the IP telephone is redirected to the main office.
Call forwarding not supported in SN08, leave field blank.
MO TPS Read-only This field echoes the IP address of the CICM to which the set is connected.
That is, the IP address in S1.
Note: The SRG50 DNs must be configured before the following
procedures can be undertaken. Refer to “Configuring telephone (DN)
records” on page 66 .
Table 9
SRG_CS2000Terminal Details fields (Sheet 2 of 2)
Field Values Description