manualshive.com logo in svg

Nortel SMC 2450, Руководство по внедрению

Поделиться
Скачать
Nortel SMC 2450 Скачать руководство пользователя страница 203

 Web User Interface (UI)

 Page 203 of 260

Secure Multimedia Controller

Implementation Guide

Global command forms 

The global command buttons are always available at the top of each form. 

These buttons display forms used to save, examine, or cancel configuration 
changes, and log off. Each global command form provides options to verify 
or cancel the command. 

Apply 

Use the global Apply form to check the validity of the pending configuration 
changes for the current session, and to save the configuration changes and put 
them into effect. 

The global Apply form includes the following items: 

•

Apply Changes pull-down list: to use this menu, select one of the 
following commands and click the Submit button: 

— Apply Changes: When selected, this command updates the SMC 

with any pending configuration changes. Pending changes are first 
validated for correctness (see “Validate Configuration” on page 24). 
If no problems are found, the changes are applied and put into effect. 
If problems are found, applicable warning and error messages are 
displayed. Warnings are allowed, and the changes are applied and 
put into effect. Errors are not allowed, and the changes are not 
applied. This command has no effect on pending changes in other 
open CLI or Web UI sessions. See Figure 70 on page 101 for 
information about taking control of the GUI lock. 

— Validate Configuration: When selected, this option validates 

pending changes for the current session, but does not apply them. 
The pending configuration changes are examined to ensure that they 
are complete and consistent. If problems are found, the following 
types of messages are displayed:

Содержание SMC 2450







































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды