Nortel SMC 2450, Руководство по внедрению

Страница: 143 / 262

Secure UNIStim deployment Page 143 of 260
Secure Multimedia Controller Implementation Guide
3 To change values in the menu, scroll up or down the menu items using
the left and right arrow button.
Note: If you just want to see the configuration, you can scroll up and
down using the up and down arrows on the phone.
4 To change the action byte from 1 (insecure) to 6 (secure), press the Enter
key, enter 6, and then press the Enter key again.
5 Set the RSA public key fingerprint using the 16-byte fingerprint
corresponding to the public/private key pair stored on the SMC.
The RSA public key fingerprint is retrieved from the Web UI or CLI and is
associated with the primary key of the server. It consists of sixteen
hexadecimal digits (0 - 9 and a - f). You must manually enter the RSA
public key fingerprint into the IP phone. An example 16-character
fingerprint is: 8a166e6cc08be496. Key in the numerals (0 - 9) using the
phone keypad. Key in the letters using the convention of the pound key
(#) plus the corresponding number. For example, #1 = a and #6 = f.
6 If the IP client can register to an alternate server (S2 IP), change the
action byte and key fingerprint as required for S2.
7 Press the Apply and Reset button.
End of Procedure
Note: If you used automatic fingerprint update and the phones have
default configuration value for fingerprint as ffffffffff and action byte 1 and
you want to check whether correct fingerprint was written to the phones
by the SMC, you have to enter the network configuration.
For the i2002, i2004 IP phones, you must change the action byte to 6 and
then go to the fingerprint menu item. For 1140e, 1120e and i2007, you
can look at the fingerprint by scrolling down the configuration menu.
Automatic fingerprint update
For IP phones running in insecure mode with default security settings, the
SMC can automatically update/populate the public key fingerprint on the