Documentation Release Note
Number: MER-1002-003
No
r
tel Networks 11/4/02 19 of 26
TM
Installing and enabling the Peripheral Signaling (Per Sig)
cards
Procedure 9
Installing and enabling Peripheral Signaling cards
1
Install a Per Sig card into slot 4 of each new Network module. Push the
latches forward to lock the card in place.
2
Faceplate
enable
the cards.
—————————— End of Procedure ——————————
Disabling and inserting the FIJI cards
Procedure 10
Disabling and inserting FIJI cards
1
Faceplate
disable
the FIJI cards.
2
Insert the FIJI cards into slots 2 and 3 of each new Network module.
Do not plug the card into the backplane.
—————————— End of Procedure ——————————
Disabling and inserting the Conf/TDS cards, if necessary
If Conf/TDS cards are used in the system, follow the procedures below.
Procedure 11
Disabling and inserting Conf/TDS cards
1
Faceplate
disable
the Conf/TDS cards.
2
Insert a Conf/TDS card into each new Network module.
Do not plug the card into the backplane.
—————————— End of Procedure ——————————
