Nortel CallPilot 702t, Руководство по установке и настройке

Страница: 263 / 306

October 2002 Replacing DIMMs and the CPU
Part 5: 702t Server Maintenance and Diagnostics 263
To remove the existing CPU
1 Power down the server and remove the side cover.
2 Pinch the latches at either side of the existing CPU, and press in until
they snap into the closed (unlocked) position.
3 Pull the CPU straight out.
To install a CPU
1 Pinch the latches at either side of the existing CPU, and press in until
they snap into the closed (unlocked) position.
2 Pull the processor straight out.
3 Remove the new CPU from its protective package.
4 Pull the latches gently out to the open (locked) position.
5 Align the CPU with the SEC on the baseboard.
6 Press the CPU firmly into place until you hear the snap that indicates the
processor is in place. The latches automatically click open to hold the
CPU locked in place.
.
CAUTION
Risk of equipment damage
Take precautions to protect computer boards. Electrostatic
discharge (ESD) can render boards damaged or unusable. Wear
an ESD wrist strap.
.
DANGER
Risk of personal injury
If the system has been running, any installed processor and
heat sink on the processor board(s) is hot. To avoid a burn, be
careful when removing or installing baseboard components
that are located near processors.