Nortel CallPilot 702t, Руководство по установке и настройке

Страница: 261 / 306

October 2002 Replacing DIMMs and the CPU
Part 5: 702t Server Maintenance and Diagnostics 261
To remove baseboard DIMMs
1 Gently push the plastic ejector levers out and down to eject a DIMM from
its socket.
2 Hold the DIMM only by its edges; be careful not to touch its components
or gold-edge connectors. Carefully lift it away from the socket, and store
it in an antistatic package.
3 Repeat to remove other DIMMs as necessary.
To install baseboard DIMMs
1 Hold the DIMM only by its edges when you remove it from its antistatic
package.
2 Orient the DIMM so that the two notches in the bottom edge of the DIMM
align with the keyed socket.
.
CAUTION
Risk of equipment damage
Use extreme care when removing a DIMM. Too much pressure
can damage the socket slot. Apply only enough pressure on the
plastic ejector levers to release the DIMM.
.
CAUTION
Risk of equipment damage and data corruption
Use extreme care when installing a DIMM. Too much pressure
can damage the socket. DIMMs are keyed and can be inserted
in only one way.
Also use only Nortel Networks-approved DIMMs. A mixture of
dissimilar metals (from the use of non-approved DIMMs) can
cause later memory failures, resulting in data corruption.