Nortel 4500 Series, Обзор конфигурации системы

Страница: 245 / 320

General Switch Administration using the JDM 245
Field Description
• mgmt(5): Value of the corresponding instance of
dot1dTpFdbAddress is also the value of an existing instance
of dot1dStaticAddress.
• other: None of the preceding. This includes instances
where another MIB object (not the corresponding instance
of dot1dTpFdbPort or an entry in the dot1dStaticTable)
is used to determine if frames addressed to the value of
dot1dTpFdbAddress are being forwarded.
Address A unicast MAC address for which the bridge has forwarding or
filtering information.
Port Either the value 0 or the port number on a frame has been seen.
The source address must be equal to the value of the corresponding
instance of dot1dTpFdbAddress
A value of 0 indicates that the port number has not been learned,
so the bridge does have the forwarding or filtering information for
this address (in the dot1dStaticTable). You must assign the port
value to this object whenever it is learned even for addresses for
which the corresponding value of dot1dTpFdbStatus is not learned.
Configuring SNTP
The SNTP screen contains the parameters for configuring Simple Network
Time Protocol (SNTP).
Step Action
1
Open the SNTP screen by selecting Edit > SNTP as illustrated in
"SNTP screen" (page 246) .
Nortel Ethernet Routing Switch 4500 Series
Overview — System Configuration
NN47205-500 02.01 Standard
5.0 23 February 2007
Copyright © 2007, Nortel Networks Nortel Networks Confidential
.